Jonsered CS 2153 Handbuch Seite 1

CS 2152 CS 2153 Oper ator’s manual Please read the oper ator’s manual carefully and make sure you understand the instructions before using the machi

10 – EnglishGENERAL SAFETY PRECAUTIONSCutting hardwoods (most broadleaf trees) creates more vibration than cutting softwoods (most conifers). Cutting

English – 11GENERAL SAFETY PRECAUTIONSCutting equipment designed to reduce kickbackThe only way to avoid kickback is to make sure that the kickback zo

12 – EnglishGENERAL SAFETY PRECAUTIONS• The cutting part of the chain is called the cutter and consists of a cutting tooth (A) and the depth gauge (B)

English – 13GENERAL SAFETY PRECAUTIONSAdjustment of depth gauge setting• The cutting teeth should be newly sharpened before adjusting the depth gauge

14 – EnglishGENERAL SAFETY PRECAUTIONSFilling with chain oil• All our chain saws have an automatic chain lubrication system. On some models the oil flo

English – 15GENERAL SAFETY PRECAUTIONSBarCheck regularly:• Whether there are burrs on the edges of the bar. Remove these with a file if necessary.• Whe

16 – EnglishASSEMBLYFitting the bar and chainCheck that the chain brake is in disengaged position by moving the front hand guard towards the front han

English – 17FUEL HANDLINGFuelNote! The machine is equipped with a two-stroke engine and must always be run using a mixture of gasoline and two-stroke

18 – EnglishFUEL HANDLINGFuelingClean the area around the fuel cap. Clean the fuel and chain oil tanks regularly. The fuel filter must be replaced at l

English – 19STARTING AND STOPPINGStarting and stoppingCold engineStarting: The chain brake should be activated when starting the chain saw. Activate t

2 – English KEY T O SYMBOLS Symbols on the mac hine: W ARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fat

20 – EnglishSTARTING AND STOPPINGNote! Pull the front hand guard towards the front handle. The chain brake is now disengaged. Your saw is ready for us

English – 21WORKING TECHNIQUESBefore use:1 Check that the chain brake works correctly and is not damaged.2 Check that the rear right hand guard is not

22 – EnglishWORKING TECHNIQUES6 Before moving your chain saw switch off the engine and lock the chain using the chain brake. Carry the chain saw with

English – 23WORKING TECHNIQUES8 Unless the user resists this pushing force there is a risk that the chain saw will move so far backwards that only the

24 – EnglishWORKING TECHNIQUESCuttingIf you have a pile of logs, each log you attempt to cut should be removed from the pile, placed on a saw horse or

English – 25WORKING TECHNIQUESFelling directionThe aim is to fell the tree in a position where you can limb and cross-cut the log as easily as possibl

26 – EnglishWORKING TECHNIQUESThe directional cuts should run 1/4 of the diameter through the trunk and the angle between the top cut and bottom cut s

English – 27WORKING TECHNIQUESFreeing a tree that has fallen badly Freeing a ”trapped tree”It is very dangerous to remove a trapped tree and there is

28 – EnglishWORKING TECHNIQUESHow to avoid kickbackWhat is kickback?The word kickback is used to describe the sudden reaction that causes the chain sa

English – 29MAINTENANCEGeneralThe user must only carry out the maintenance and service work described in this manual.Carburetor adjustmentDue to exist

English – 3 CONTENTS Contents KEY TO SYMBOLS Symbols on the machine: ... 2Symbols in the operator’s ma

30 – EnglishMAINTENANCEHigh speed jet HAt the factory the engine is adjusted at sea level. When working at a high altitude or in different weather con

English – 31MAINTENANCEGrasp the chain saw firmly, wrapping your fingers and thumbs around the handles.Apply full throttle and activate the chain brake

32 – EnglishMAINTENANCEMufflerNever use a machine that has a faulty muffler.Regularly check that the muffler is securely attached to the machine.Some muf

English – 33MAINTENANCETensioning the recoil spring• Hook the starter cord in the notch in the pulley and turn the starter pulley about 2 turns clockw

34 – EnglishMAINTENANCESpark plugThe spark plug condition is influenced by:• Incorrect carburetor adjustment.• An incorrect fuel mixture (too much or i

English – 35MAINTENANCE”Air Injection” centrifugal cleaningCentrifugal cleaning means the following: All air to the carburetor passes through the star

36 – EnglishMAINTENANCEMaintenance scheduleThe following is a list of the maintenance that must be performed on the machine. Most of the items are des

English – 37TECHNICAL DATATechnical dataCS 2152 CS 2153EngineCylinder displacement, cu.in/cm33,15/51,7 3,06/50,1Cylinder bore, inch/mm 1,77/45 1,74/44

38 – EnglishTECHNICAL DATARecommended original and replacement bar and chain combinationsFollowing is a list of recommended cutting equipment for the

English – 39FEDERAL EMISSION CONTROL WARRANTY STATEMENTYOUR WARRANTY RIGHTS AND OBLIGATIONSThe EPA (The US Environmental Protection Agency), Environme

4 – English INTR ODUCTION Dear customer! Cong ratulations on your choice to buy a Jonsered product!Your purchase gives you access to professional h

40 – EnglishAMERICAN STANDARD SAFETY PRECAUTIONSSafety precautions for chain saw users(ANSI B 175.1-2000 Annex C)Kickback safety precautionsWith a bas

´®z+RI•¶55¨´®z+RI•¶55¨

´®z+RI•¶55¨2007-05-14´®z+RI•¶55¨1150419-95

English – 5 WHA T IS WHA T? What is what on the chain saw? 1 Cylinder cover2 Front handle (Felling direction guide)3 Front

6 – English GENERAL SAFETY PRECA UTIONS Bef ore using a new chain saw • Please read this manual carefully.• Check that the cutting equipment is cor

English – 7 GENERAL SAFETY PRECA UTIONS chain sa w usage if possible. Your dealer, forestry school or your library can provide information about wh

8 – English GENERAL SAFETY PRECA UTIONS • The brake is applied when the front hand guard (B) is pushed forwards.• This movement activates a spring-

English – 9 GENERAL SAFETY PRECA UTIONSWill my hand always activate the chain brake during a kickback?No. It takes a certain force to move the hand