Jonsered RS44/52 Handbuch

Operator’s manual (EPA) Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

10 – English SAFETY INSTRUCTIONS General safety precautions Starting • The complete clutch cover and shaft must be fitted before the machine is start

English – 11 SAFETY INSTRUCTIONS General working instructions Basic safety rules 1 Look around you:• To ensure that people, animals or other things

12 – EnglishSAFETY INSTRUCTIONSThe ABC of clearing• Always use the correct equipment.• Make sure the equipment is well adjusted.• Follow the safety pr

English – 13SAFETY INSTRUCTIONS• Large stems must be cut from two sides. First determine which direction the stem will fall. Make the first cut on the

14 – EnglishSAFETY INSTRUCTIONSGrass trimming with a trimmer headTrimming• Hold the trimmer head just above the ground at an angle. It is the end of t

English – 15WHAT IS WHAT?What is what on the clearing saw? (RS44)23241 Blade2 Grease filler cap3 Bevel gear4 Cutting attachment guard5 Shaft6 Handlebar

16 – EnglishWHAT IS WHAT?What is what on the clearing saw? (RS52)1 Blade2 Grease filler cap3 Bevel gear4 Cutting attachment guard5 Shaft6 Handlebar7 Th

English – 17ASSEMBLYAssembling the handlebar and throttle• Unscrew the knob from the handlebar mounting.• Position the handlebar as shown. Fit the mou

18 – EnglishASSEMBLYFitting a blade guard, grass blade and grass cutter• The blade guard (A) is fitted using 4 screws (L) and the support plate (M) as

English – 19ASSEMBLYFitting the trimmer guard and trimmer head Trimmy SII• Fit the correct trimmer guard (A) for use with the trimmer head. Secure the

2 – English KEY TO SYMBOLS Symbols WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serio

20 – EnglishASSEMBLYAdjusting the harness and clearing sawSafety releaseAt the front is an easily accessible, quick release. Use this if the engine ca

English – 21FUEL HANDLINGFuelCAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-st

22 – EnglishSTARTING AND STOPPINGCheck before starting• Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the cent

English – 23STARTING AND STOPPINGStoppingStop the engine by switching off the ignition.StartingHold the body of the machine on the ground using your l

24 – EnglishMAINTENANCECarburettorYour Jonsered product has been designed and manufactured to specifications that reduce harmful exhaust fumes. The eng

English – 25MAINTENANCEHigh speed jet HThe high speed jet H affects the engine power, speed, temperature and fuel consumption. If the high speed jet H

26 – EnglishMAINTENANCEAir filterThe air filter must be regularly cleaned to remove dust and dirt in order to avoid:• Carburettor malfunctions• Starting

English – 27MAINTENANCEFiling the saw blade• See the cutting attachment packaging for correct sharpening instructions. A correctly filed blade is essen

28 – EnglishTECHNICAL DATATechnical dataNote 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure lev

English – 29FEDERAL EMISSION CONTROL WARRANTY STATEMENTYOUR WARRANTY RIGHTS AND OBLIGATIONSThe EPA (The US Environmental Protection Agency), Environme

English – 3 CONTENTS Contents Note the following before starting: Jonsered has a policy of continuous product development and therefore reserves the

12345678935-50 NM~ 15 cm6'"Clic"~ 3,5 m11 '7,0 m23'2,4-3,3 mm.095"-.130"12 cm5"Trimmy SII

2,7-3,3 mm.106-.130"15 cm 6"15 cm 6"15 cm 6"15 cm 6"12356710111.)2.)>1,1 Kw<1,1 Kw2,7 mm - 9,0 m3,0 mm

´®z*xy=¶5}¨´®z*xy=¶5}¨

´®z*xy=¶5}¨2003-04-16´®z*xy=¶5}¨1088892-95

4 – English SAFETY INSTRUCTIONS Personal protective equipment HELMETA helmet should be worn if the trees being cleared are taller than 2 m.HEARING P

English – 5 SAFETY INSTRUCTIONS Cutting attachment guard This guard is intended to prevent loose objects from being thrown towards the operator. The

6 – English SAFETY INSTRUCTIONS Cutting equipment Saw blades are intended for cutting fibrous types of wood.Grass blades and grass cutters are intend

English – 7 SAFETY INSTRUCTIONS • See instructions under the heading Start. Start the machine and apply full throttle. Release the throttle and chec

8 – English SAFETY INSTRUCTIONS Cutting equipment This section describes how to choose and maintain your cutting equipment in order to:• Reduce the

English – 9 SAFETY INSTRUCTIONS Filing the saw blade • See the cutting attachment packaging for correct sharpening instructions. A correctly filed bl